GEFEN HDBaseT WallPlate Sender

. Supports 300 MHz TMDS Clock and data throughput of up to 10.2 Gbps . Automatic switching of 4K HDMI and VGA . Manual switching of 4K HDMI and VGA via front panel button or RS-232 . VGA scaling up to 1920 x 1200 with picture adjustments . Extend HDMI, VGA with analog audio, and RS-232 over a single CAT-5e: 4K Ultra HD (3840 x 2160 @ 60 Hz, 4:2:0), up to 130 feet/40 meters (8-bit color) 4K Ultra HD (3840 x 2160 @ 30 Hz, 4:4:4), up to 130 feet/40 meters (8-bit color) 4K Cinema (DCI) (4096 x 2160 @ 24 or 30 Hz 4:4:4), up to 130 feet/40 meters (8-bit color) 1080p Full HD (60 Hz) or WUXGA (1920x1200 @ 60 Hz), up to 230 feet/70 meters (up to 12-bit Deep Color) . HDMI Features Supported: HDMI 2.0 HDCP 1.4 12-bit Deep Color (at 1080p) LPCM 7.1, Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™ pass-through 3DTV pass-through CEC pass-through Lip Sync pass-through . Analog L/R audio input for VGA . RS-232 control of switching, scaler, and EDID management functions . Bi-Directional RS-232 extension when used with a compatible Receiver . Power over HDBaseT™ (POH) provides power to the Sender from a compatible Receiver over the link cable . Sender can also be locally powered using the 2-pin Phoenix connector on back panel . Uses Gefen’s implementation of HDBaseT™ technology with enhanced features . Advanced EDID Management for rapid integration of source and display . Field-updateable firmware via mini-USB port, using the Gefen Syner-G™ software . North American standard 2-gang wall-plate form factor . Works with most standard North American 2-gang Decora® wall-plates (white wall-plate is included) . Works with most North American 2-gang table boxes and “open-back” low-voltage installation brackets