GEFEN 4K Ultra HD 600 MHz 1:2 Scaler

. Supports 18.2 Gbps bandwidth and 600 MHz TMDS clock . Splits a 4K 600 MHz source to two displays, 4K 600 MHz or 1080p . Maximum Video Resolutions/Timing: Pass-through 4096 x 2160 (Cinema-DCI) up to 60 Hz, up to 4:4:4, 8-bit 3860 x 2160 (4K Ultra HD with HDR) up to 60 Hz, up to 4:4:4, 8-bit 1080p up to 60 Hz, up to 4:4:4, up to 12-bit 1920 x 1200 (WUXGA) up to 60 Hz . Scalers operational: 3860 x 2160 up to 60 Hz, up to 4:4:4, 8-bit 1080p up to 60 Hz, up to 4:4:4, 8-bit . Supported Audio formats: HDMI pass-thru: Up to 8 channels of HBR, Bitstream, & LPCM Analog Out: 2 ch (from PCM) Digital Out: 2 ch PCM & up to 5.1 ch Bitstream . HDMI Features Supported: HDMI 2.0 (full bandwidth to 18.2 Gbps/600 MHz) HDR-10 (High Dynamic Range) 10-bit color at 4K 60 Hz 4:2:0 and 4K 24 Hz 4:4:4 Dolby Vision™ HDR HDCP 2.2 and 1.4 12-bit Deep Color (at 1080p) Uncompressed LPCM digital audio (up to 7.1 channels) pass-through HBR (High Bit Rate) digital audio (up to 7.1 channels), including Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master Audio™, pass-through 3DTV pass-through CEC pass-through Lip Sync pass-through . Supports the use of DVI sources and DVI displays up to 1080p Full HD and WUXGA (1920x1200), with Gefen CAB-DVI2HDMI-LCK DVI-to-HDMI cables (not included) . Two independent scalers allow upscaling from 1080p to 4K on one of the outputs and downscaling from 4K to 1080p on the other . Built-in Audio-De-Embedder breaks out digital and analog audio from the HDMI signal for use with outboard amplifiers or added impact . Built-in Full-Featured 4K 600 MHz Advanced EDID Detective with Gefen Syner-G™ interface . Field-updatable firmware via Gefen Syner-G™ . Locking power connector . Surface mountable . Plug & Play – no configuration or set-up required for most applications . Compact enclosure is easy to install and can be hidden away